| Rating | DC 20V 3A | |
| Operating Temperature Range | -30~85C | |
| Standard Atmospheric Conditions | Temperature: 5~35, Humidity: 45%~85%, Pressure: 86Kpa~106Kpa | |
| Mechanical Properties | | |
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 5~20N |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 8~20N |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip for 1 min in any direction | No damage, cracks, looseness, or play. Satisfy mechanical and electrical characteristics. |
| Electrical Properties | | |
| Contact Resistance | Measured at small current (100mA or less), 1000Hz | 40m MAX |
| Insulation Resistance | Apply 100V DC for 1 min (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted) | 100M MIN |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted) | No insulation breakdown, arcing, or damage. |
| Durability | | |
| Soldering Heat Resistance (Reflow) | Preheat: 180 (120s), Peak Temp: 2605 (within 20s) | No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics. |
| Soldering Heat Resistance (Iron) | Bit Temp: 3305, Application time: 30.5 sec (no excessive pressure) | No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics. |
| Humidity Test | 402, 90%~96% RH for 96 Hr, then 1 Hr at standard atmospheric condition | No damage on appearance. Satisfy mechanical and electrical characteristics. |
| Heat Test | 702 for 96 Hours, then 1 Hr at room temperature | No damage on appearance. Satisfy mechanical and electrical characteristics. |
| Cold Test | -253 for 96 Hours, then 1 Hr at room temperature | No damage on appearance. Satisfy mechanical and electrical characteristics. |
| Life Test (No Load) | 5000 cycles at a speed of 10 to 25 cycles/min | |
| Life Test (With Load) | Rating condition (non-inductive load), 5000 cycles at a speed of 10 to 20 cycles/min | Contact Resistance 0.1, Disconnection Force: 0.8 to 2.0N. Satisfy mechanical and electrical characteristics. |
| Temperature Cycling Test | 5 cycles of specified conditions (Temp: 70 to -20, time: 1 hour per cycle) | No deformation or cracks. Insertion/Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles of specified conditions (Temp: 70 to -20, time: 0.5 hour per cycle) | No deformation or cracks. Insertion/Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
